언어
질문아두이노에서 미세먼지 값을 stm32f10x로 받을 수 있는방법이 있나요...?
밑에는 STM32코드입니다! IAR Embedded Workbench IDE 프로그램 사용합니다 getch함수로 받을수 있다는데 어떻게 해야할지 모르겠습니다... #include "stm32f10x_lib.h" #include "System_func.h" #include"lib_sensor.h" #include"lcd.h" #include"user_delay.h" u8 a=0; void print_data(char* str, u16 data); void putch(unsigned char c){ USART_SendData(USART1, c); while (USART_GetFlagStatus(USART1, USART_FLAG_TXE) == RESET); } void puts(u8 *s){ while (*s != '\0'){ putch(*s); s ++; } } unsigned char getch(){ unsigned char key = 0; while (USART_GetFlagStatus(USART1, USART_FLAG_RXNE) == RESET); key = USART_ReceiveData(USART1); return key; } int main(void){ Init_STM32F103(); EXTI_InitTypeDef EXTI_InitStructure; NVIC_InitTypeDef NVIC_InitStructure; USART_InitTypeDef USART_InitStructure; GPIO_InitTypeDef GPIO_InitStructure; u16 tempC,tempF; Timer_Delay_init(); lcdInit(); custom(); initialize_sht11_hanback(); RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOA | RCC_APB2Periph_GPIOB | RCC_APB2Periph_GPIOC | RCC_APB2Periph_USART1| RCC_APB2Periph_AFIO, ENABLE); GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP; GPIO_InitStructure.GPIO_Pin = GPIO_Pin_13; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; GPIO_Init(GPIOB, &GPIO_InitStructure); GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; GPIO_InitStructure.GPIO_Pin = GPIO_Pin_14; GPIO_Init(GPIOB, &GPIO_InitStructure); USART_InitStructure.USART_BaudRate = 9600; USART_InitStructure.USART_WordLength = USART_WordLength_8b; USART_InitStructure.USART_StopBits = USART_StopBits_1; USART_InitStructure.USART_Parity = USART_Parity_No ; USART_InitStructure.USART_HardwareFlowControl = USART_HardwareFlowControl_None; USART_InitStructure.USART_Mode = USART_Mode_Rx | USART_Mode_Tx; USART_InitStructure.USART_Clock = USART_Clock_Disable; USART_InitStructure.USART_CPOL = USART_CPOL_Low; USART_InitStructure.USART_CPHA = USART_CPHA_2Edge; USART_InitStructure.USART_LastBit = USART_LastBit_Disable; USART_Init(USART1, &USART_InitStructure); USART_Cmd(USART1, ENABLE); GPIO_InitStructure.GPIO_Pin = 0xFF; GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP; GPIO_Init(GPIOA, &GPIO_InitStructure); GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1; GPIO_InitStructure.GPIO_Mode = GPIO_Mode_IN_FLOATING; GPIO_Init(GPIOB, &GPIO_InitStructure); NVIC_InitStructure.NVIC_IRQChannel = EXTI0_IRQChannel; NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 0; NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; NVIC_Init(&NVIC_InitStructure); NVIC_InitStructure.NVIC_IRQChannel = EXTI1_IRQChannel; NVIC_InitStructure.NVIC_IRQChannelPreemptionPriority = 1; NVIC_InitStructure.NVIC_IRQChannelSubPriority = 0; NVIC_InitStructure.NVIC_IRQChannelCmd = ENABLE; NVIC_Init(&NVIC_InitStructure); GPIO_EXTILineConfig(GPIO_PortSourceGPIOB, GPIO_PinSource0); GPIO_EXTILineConfig(GPIO_PortSourceGPIOB, GPIO_PinSource1); EXTI_InitStructure.EXTI_Line = EXTI_Line0; EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt; EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising; EXTI_InitStructure.EXTI_LineCmd = ENABLE; EXTI_Init(&EXTI_InitStructure); EXTI_InitStructure.EXTI_Line = EXTI_Line1; EXTI_InitStructure.EXTI_Mode = EXTI_Mode_Interrupt; EXTI_InitStructure.EXTI_Trigger = EXTI_Trigger_Rising; EXTI_InitStructure.EXTI_LineCmd = ENABLE; EXTI_Init(&EXTI_InitStructure); while (1){ if(a==0){ lcdGotoXY(1,0); lcdPrint("PRESS 1 BUTTON!"); lcdDataWrite(0x00); lcdGotoXY(1,1); lcdPrint("PRESS 2 BUTTON!"); lcdDataWrite(0x01); } else if(a==1){ tempC = get_sht11_hanback_data(TEMP); tempF = tempC*5/9+320; delay_ms(100); lcdGotoXY(1,0); print_data("TempC : ",tempC); lcdDataWrite(0x00); lcdGotoXY(1,1); print_data("TempF : ",tempF); lcdDataWrite(0x01); } else if(a==2){ lcdClear(); } else; } } void print_data(char* str, u16 data){ lcdPrint(str); lcdDataWrite(data/100 + '0'); lcdDataWrite((data/10)%10 + '0'); lcdDataWrite('.'); lcdDataWrite((data)%10 + '0'); } 사진에 보이시는 것 처럼 stm32에 ugm3를 아두이노에서 보낸 미세먼지 값입니다ㅠㅠ 어떻게 이 ugm3값을 받을 수 있을까요...
439
3
0

윈비·2024-12-10
데이터가 문자열 형태로 전송되므로, STM32에서 문자열 처리를 추가해야 합니다. char buffer[16]; // 데이터를 저장할 버퍼
int index = 0;
void USART_Receive_String() {
while (1) {
unsigned char received = getch(); // 1바이트 수신
...
질문아두이노와 stm32사이의 통신 방법에대해 도움을 청합니다ㅠㅠ
#include <Wire.h> //LCD I2C 통신 사용 #include <LiquidCrystal_I2C.h> //LCD I2C 통신 사용 #include "sound_effect.h" // 사운드 이펙트 사용(음원효과) LiquidCrystal_I2C lcd(0x27, 16, 2); //LCD 주소 할당 int blue_pin = 2; //블루 LED int green_pin = 3; //그린 LED int red_pin = 4; //레드 LED int pin = 8; //먼지센서 int buzzer_pin = 13; //부저 unsigned long duration; //지속 시간 unsigned long starttime; //시작 시간 unsigned long sampletime_ms = 5000; //샘플시간 5초 마다 업데이트 unsigned long lowpulseoccupancy = 0; //Low 신호가 지속된 시간을 초기화 float ratio = 0; //비율 float concentration = 0; //입자 농도 0으로 초기화 float pcsPerCF = 0; //한 입자당 CF를 0으로 초기화 float ugm3 = 0; //최종 값으로 세제곱미터 당 마이크로 그램(㎍/㎥) uint8_t clock[8] = { 0x0, 0xe, 0x15, 0x17, 0x11, 0xe, 0x0 }; // 시계 이모티콘 void setup() { Serial.begin(9600); //시리얼 통신 시작 pinMode(8, INPUT); //미세먼지 센서 입력 pinMode(2, OUTPUT); //블루 LED 출력 pinMode(3, OUTPUT); //그린 LED 출력 pinMode(4, OUTPUT); //레드 LED 출력 pinMode(13, OUTPUT); //부저 출력 digitalWrite(blue_pin, HIGH); //애노드 RGB LED 이므로 HIGH이면 꺼진다.(이하 2개 동일) digitalWrite(green_pin, HIGH); digitalWrite(red_pin, HIGH); starttime = millis(); //현재 시간 대입 lcd.begin(); //LCD 시작 lcd.backlight(); //백라이트 ON lcd.clear(); //LCD 초기화 lcd.print("Hello! SIMP!"); //다음 문자를 LDC에 출력 lcd.setCursor(0, 1); //두 번째 줄로 커서 이동 lcd.print("I will find DUST"); lcd.createChar(1, clock); //시계 이모티콘 출력 seSqueak(13); //초기시작 음원효과 delay(5000); // 5초 대기 if (ugm3 == 0) { //만약 결과값이 0보다 작으면 아래를 LCD에 출력한다. lcd.clear(); lcd.print("Analysing Data"); lcd.write(1); lcd.setCursor(0, 1); lcd.print("................"); lowpulseoccupancy = 0; starttime = millis(); } } void loop() { duration = pulseIn(pin, LOW); lowpulseoccupancy = lowpulseoccupancy + duration; if ((millis() - starttime) >= sampletime_ms) { //만약 샘플 시간이 5초라면(위에서 정한 샘플 시간) ratio = lowpulseoccupancy / (sampletime_ms10 .0); // 정수 백분율 concentration = 1.1 pow(ratio, 3) - 3.8 pow(ratio, 2) + 520 ratio + 0.62; // 미세먼지 센서 사양 시트 곡선 사용 pcsPerCF = concentration * 100; // 입자 농도에 100을 곱하면 입자당 CF값 ugm3 = pcsPerCF / 13000; //입자당 CF를 13000으로 나누면 미터세제곱당 마이크로그람의 미세먼지 측정값 if (ugm3 > 0.01) { // 만약에 결과값이 0.01보다 크면 미세먼지 값을 출력하라 lcd.clear(); lcd.print("Dust:"); lcd.print(ugm3); lcd.print("ug/m3"); Serial.print("ugm3: "); Serial.println(ugm3); delay(1000); lowpulseoccupancy = 0; starttime = millis(); } if (ugm3 > 0.01 && ugm3 <= 30) { //만약 미세먼지 값이 0.01 보다 크고 30이랑 같거나 작으면 아래를 출력 lcd.setCursor(0, 1); lcd.print("Good! ^v^"); setColor(0, 0, 225); //블루 noTone(13); //소리 끔 } else if (ugm3 > 30 && ugm3 <= 80) { //만약 미세먼지 값이 30보다 크고 80이랑 같거나 작으면 아래를 출력 lcd.setCursor(0, 1); lcd.print("SoSo! ^ ^;"); setColor(0, 255, 225); //블루그린 noTone(13); //소리 끔 } else if (ugm3 > 80 && ugm3 <= 150) { //만약 미세먼지 값이 80보다 크고 150이랑 같거나 작으면 아래를 출력 lcd.setCursor(0, 1); lcd.print("Bad! T.T"); setColor(255, 120, 0); //오렌지 noTone(13); //소리 끔 } else if (ugm3 > 150) { //만약 미세먼지 값이 150 보다 크면 아래를 출력 lcd.setCursor(0, 1); lcd.print("Be Careful @.@"); setColor(255, 0, 0); //레드 tone(13, 500); //500Hz로 소리 재생 } } } void setColor(int red, int green, int blue) { //RGB LED 출력을 위한 아날로그 출력 세팅 analogWrite(red_pin, 255 - red); analogWrite(green_pin, 255 - green); analogWrite(blue_pin, 255 - blue); } 위에 코드는 아두이노의 코드 입니다 아래의 코드는 아두이노에서 stm32로 송신하는 코드입니다 아두이노 TX랑 STM32 RX랑 연결하였습니다 혹시 송신 방법이 이게 맞을까요? Serial.print("ugm3: "); Serial.println(ugm3); delay(1000);
546
1
0

윈비·2024-12-11
아두이노와 STM32의 TX와 RX 핀을 연결했다면, 아래 사항들을 확인해보세요. 아두이노와 STM32의 GND 핀을 반드시 연결해야 합니다. 아두이노와 STM32 모두 9600bps로 설정되어야 합니다. 아두이노가 5V 논리 레벨을 사용하고 STM32가 3.3V 레벨을 사용한다면, 레벨 변환기를 사용하는 것이 안전합니다.
질문아두이노 워터펌프가 작동하지 않습니다
코드는 아래에 있습니다 int n=1; void setup() { Serial.begin(9600); pinMode(3,INPUT); pinMode(4, OUTPUT); digitalWrite(4,LOW); } void loop() { Serial.end(); Serial.begin(9600); if(digitalRead(3)==LOW){ if(n==1){ Serial.print("Put numbers:"); n=0; } while(Serial.available() == 0) {} float acid=Serial.parseFloat(); Serial.println(float(acid)); digitalWrite(4,HIGH); delay(acid*1000.0);
668
1
0

라이너·2024-11-28
몇 가지 개선이 필요해 보입니다. 첫째, Serial.end()와 Serial.begin()을 loop() 안에서 반복적으로 호출하고 있습니다. 이는 불필요하며, 데이터 통신에 문제를 일으킬 수 있습니다. 따라서 Serial.begin()은 setup()에서 한 번만 호출하도록 수정해야 합니다. 둘째, Serial.available()를 사용하는 방...
질문체스를 만들고 있는데 기물이 옮겨지지 않습니다
현재 만드는 중인 체스인데, 기물을 옮기는 과정에서 기물이 사라지기만 하고 옮겨지지가 않습니다 도와주세요 #include <stdio.h> char X; int Y; char mX; int mY; char piece; void boardprint(char board[8][8]); int Pawn(char X,int Y,char mX,int mY); int Rook(char X,int Y,char mX,int mY); int Knight(char X,int Y,char mX,int mY); int Bishop(char X,int Y,char mX,int mY); int King(char X,int Y,char mX,int mY); int Queen(char X,int Y,char mX,int mY); int main(){ char board[8][8]; for(int y=0;y<8;y++){ for(int x=0;x<8;x++){ board[y][x]=' '; } } for(int x=0;x<8;x++){ board[1][x]='p'; board[6][x]='P'; } board[0][0]='r'; board[0][7]='r'; board[7][0]='R'; board[7][7]='R'; board[0][1]='n'; board[0][6]='n'; board[7][1]='N'; board[7][6]='N'; board[0][2]='b'; board[0][5]='b'; board[7][2]='B'; board[7][5]='B'; board[0][4]='k'; board[7][4]='K'; board[0][3]='q'; board[7][3]='Q'; int cnt=0; printf("체스 게임에 오신 것을 환영합니다. 알파 버전이며 오류가 발생할 수도 있습니다.\n"); printf("움직일 기물을 선택하는 형식은 (기물이름) (x좌표) (y좌표) 입니다.\n"); printf("움직일 위치를 선택하는 형식은 (x좌표) (y좌표) 입니다. \n"); printf("대문자가 백이자 아랫쪽 플레이어의 기물, 소문자가 흑이자 윗쪽 플레이어의 기물입니다. \n"); while(1){ cnt++; boardprint(board); printf("%d번째 아랫쪽 플레이어 턴입니다.",cnt); printf("움직일 기물을 선택해주세요:"); scanf("%c %c %d",&piece,&X,&Y); printf("움직일 위치를 정해주세요:"); scanf("%c %d",&mX,&mY); X=X-'a'; mX=mX-'a'; Y=8-Y; mY=8-mY; switch (piece){ case 'P': if(Pawn(X,Y,mX,mY)){ board[Y][X]=' '; board[mY][mX]='P'; } break; case 'R': if(Rook(X,Y,mX,mY)){ board[Y][X]=' '; board[mY][mX]='R'; } break; case 'N': if(Knight(X,Y,mX,mY)){ board[Y][X]=' '; board[mY][mX]='N'; } break; case 'B': if(Bishop(X,Y,mX,mY)){ board[Y][X]=' '; board[mY][mX]='B'; } break; case 'K': if(King(X,Y,mX,mY)){ board[Y][X]=' '; board[mY][mX]='K'; } break; case 'Q': if(Queen(X,Y,mX,mY)){ board[Y][X]=' '; board[mY][mX]='Q'; } break; } } } void boardprint(char board[8][8]){ printf("해당 라운드의 체스 보드입니다.\n"); for(int a=0;a<8;a++){ for(int b=0;b<8;b++){ if(b==0) printf("%d",8-a); printf(" %c ",board[a][b]); } printf("\n"); } printf(" "); for(int b=0;b<8;b++){ printf(" %c ",'a'+b); } printf("\n"); } int Pawn(char X,int Y,char mX,int mY){ if(Y==1||Y==6){ if(Y-mY==2||Y-mY==-2) return 1; else if(Y-mY==1||Y-mY==-1) return 1; else return 0; } else if(Y-mY==1||Y-mY==-1) return 1; else return 0; } int Rook(char X,int Y,char mX,int mY){ if(X!=mX&&Y==mY){ return 1; } else if(Y!=mY&&X!=mY){ return 1; } else{ return 0; } } int Knight(char X,int Y,char mX,int mY){ switch (mX-X){ case 1: if(Y-mY==2||mY-Y==2) return 1; else return 0; break; case 2: if(Y-mY==1||mY-Y==1) return 1; else return 0; break; case -1: if(Y-mY==2||mY-Y==2) return 1; else return 0; break; case -2: if(Y-mY==1||mY-Y==1) return 1; else return 0; break; default: return 0; } } int Bishop(char X,int Y,char mX,int mY){ if(X-mX==Y-mY) return 1; else if(X-mX==mY-Y) return 1; else return 0; } int King(char X,int Y,char mX,int mY){ if(X==mX){ if(Y-mY==1) return 1; else if(mY-Y==1) return 1; else return 0; } else if(X-mX==1){ if(Y-mY==1) return 1; else if(mY-Y==1) return 1; else if(mY==Y) return 1; else return 0; } else if(mX-X==1){ if(Y-mY==1) return 1; else if(mY-Y==1) return 1; else if(mY==Y) return 1; else return 0; } else return 0; } int Queen(char X,int Y,char mX,int mY){ if(Bishop(X,Y,mX,mY)||Rook(X,Y,mX,mY)){ return 1; } else return 0; }
486
2
0

윈비·2024-11-20
먼저 입력 문자의 개행 문자가 버퍼에 남아있어서 영향을 줄 수 있으니 scanf의 앞에 공백을 추가해보세요. scanf(" %c %c %d", &piece, &X, &Y); // 공백추가
scanf(" %c %d", &mX, &mY); // 공백추가 그리고 Y와 mY 범위가 배열을 넘지않도록 검증하는 코드를 추가해보세요....
질문c++ 고수님들 도와주십시오.
안녕하세요? C++ 초보라 고수님들 도움이 필요한 상황이라 질문 드립니다. 아래 TableName 함수에서 int CJobFile ::GetFileNo() 함수를 Call 하고 싶습니다. 호출 부분이 제가 작성한 부분인데, 객체 생성하고 호출하려니 안되네요 ^^; 아래 헤더 파일과 cpp 파일처럼 구현했는데 error: no matching function for call to 라고 계속 뜨네요 ㅜㅜ 고수님들이 고견 부탁드립니다. ------------------ 헤더 파일 -------------------- class CJobFile { public: CJobFile ( Com* com ); virtual ~CJobFile(); int GetFileNo(); }; ------------------- cpp 파일 ------------------------- CJobFile ::CJobFile ( Com* com ) : com_(new CState(com)){ } CJobFile::~CJobFile() { assert(comt_ == nullptr); } std::string TableName() { CJobFile cjf; --> 객체 생성 int flevel = cjf.GetFileNo(); --> 호출 return MakeName(path, number); } int CJobFile ::GetFileNo() { return fileno; }
398
3
0

윈비·2024-10-18
CJobFile의 생성자는 인자를 필요로 하는데 호출 시 인자가 없이 호출해서 발생하는 에러 같습니다. 아래는 수정된 코드이니 참고하시기 바랍니다. // 헤더 파일
class CJobFile {
public:
CJobFile(Com* com); // 생성자가 Com*을 받음
virtual ~CJobFile();
int GetFileN...
질문포인터사용 배열 요소 합계
int a[5]={1,2,3,4,5} int *pa=NULL; int hap=0,cnt=0; pa=a; for(cnt=0;cnt<5;cnt++) { hap+=*pa++; printf("%d",pa) } 간략해서 이렇게 합을 구하고 각 배열a[0[,a[1]의 주소를 바로 pa로 구하던데 제가 실제로 코딩짜보면 당연히 a[0]의 주소값으로 먼저 안나오고 첫 시작이 a[1]의 주소와 그의 값이 나오게 됩니다. 책이 잘못나온건가요? 여기서 합이랑 같이 a[0]의 주소값부터 쭉 나오게 할려면 어떤 코드가 필요할까요?
380
1
0

윈비·2024-07-19
*pa++ 표현식의 해석 순서와 관련이 있는데요. *pa++는 *(pa++)로 해석되며, 이 경우 pa의 값이 먼저 사용되고 나서 pa가 증가합니다. 따라서 printf가 호출될 때 pa는 이미 다음 요소를 가리키고 있습니다. 이로 인해 printf는 a[0]의 주소가 아닌 a[1]의 주소를 출력합니다. 해결하려면 아래와 같이 printf를 *pa를...
질문c++ 이용한 socket.IO에서 수신 이벤트 메세지가 안와요....
node.js로 만든 에코 서버 코드입니다. const flatbuffers = require('flatbuffers'); const express = require('express'); const http = require('http'); const socketio = require('socket.io'); const app = express(); const server = http.createServer(app); const io = socketio(server); app.get('/', (req, res) => { res.send('Server is running'); }); io.on('connection', (socket) => { console.log('A client connected'); // input_string 이벤트를 받는 부분 socket.on('message', (data) => { try { console.log('Sending data to client... Size:', data.length, 'bytes'); socket.emit('message', data); console.log('Send packet'); } catch{ console.error('Error :', error); } }); // 클라이언트가 연결을 끊었을 때의 처리 socket.on('disconnect', () => { console.log('A client disconnected'); }); }); const PORT = process.env.PORT || 5000; server.listen(PORT, () => { console.log(Server is running on port ${PORT}); }); c++/socket.io를 사용한 클라이언트입니다. include include include include include include include include include "./socket.io/sio_client.h" include "flatbuffers/flatbuffers.h" include "messages_generated.h" using namespace std; using namespace sio; std::vector CreateChat(std::string _contents) { flatbuffers::FlatBufferBuilder builder; uint64_t _uid = 1234567890; auto _nick = builder.CreateString("sample"); auto _group = builder.CreateString("group1"); auto _target = builder.CreateString("target1"); auto _content = builder.CreateString(_contents.c_str()); auto _data = messages::CreateReqChat(builder, _uid, _nick, _group, _target, _content); builder.Finish(_data); return std::vector(builder.GetBufferPointer(), builder.GetBufferPointer() + builder.GetSize()); } int main() { // 서버 주소 const std::string server_url = "http://localhost:5000"; std::cout << "Connecting to server: " << server_url << std::endl; // Socket.io 클라이언트 생성 sio::client client; client.set_open_listener([&]() { std::cout << "Connected to server" << std::endl; }); // 연결 종료 이벤트 핸들러 client.set_close_listener([&](client::close_reason const& reason) { std::cerr << "Connection closed: " << reason << std::endl; std::exit(EXIT_SUCCESS); }); // 연결 실패 이벤트 핸들러 client.set_fail_listener([&]() { std::cerr << "Failed to connect to server" << std::endl; std::exit(EXIT_FAILURE); }); // 패킷 수신을 처리하는 스레드 시작 std::thread receiverThread([&client]() { //패킷 받기 client.socket()->on("message", sio::socket::event_listener_aux([&](string const& name, message::ptr const& data, bool isAck, message::list& ack_resp) { std::cout << "Received data from server" << std::endl; })); }); client.connect(server_url); std::cout << "Press 'q' or 'Q' to exit..." << std::endl; std::thread inputThread([&]() { std::string input; do { std::getline(std::cin, input); std::istringstream iss(input); std::vector<std::string> tokens{ std::istream_iterator<std::string>{iss}, std::istream_iterator<std::string>{} }; std::string _keyword = tokens[0]; auto packet = CreatePacketReqChat(_keyword.c_str()); client.socket()->emit("message", std::make_shared<std::string>(packet.data(), packet.size())); if (_keyword == "q" || _keyword == "Q") { client.sync_close(); return; } } while (true); // 소켓 닫기 client.sync_close(); }); inputThread.join(); receiverThread.join(); return 0; } 서버에서는 패킷을 받고 클라이언트에 패킷을 보내는 로그까지 다 확인했습니다. 근데 클라이언트에서 패킷 수신이 안되고 있습니다. 서버에서 socket.emit('message', {}); 이렇게 보내면 클라이언트에서 패킷 수신은 되는데 flatbuffers를 담아서 하려고 하면 수신이 안되고 있습니다. 고수님들의 조언 부탁드립니다. 프로그래밍 혼자 공부하기 힘드네요.....
319
0